Brand: Deco-Color
Product Code: Deco Color-Epoxy RAL 9016 400ml
Availability: In Stock
7.63€ 8.92€
Ex Tax: 6.20€

4 or more 7.24€
6 or more 7.01€
8 or more 6.86€

Deco Color-Epoxy RAL 9016 400ml

Fast drying epoxy lacquer for corrections, scratches, defects, cracks and parts of bathtubs, sinks, showers, washing machines and other household appliances. Suitable for enamel surfaces, ceramics, glass, wood and plastic. It can be used for furniture, tools or even some part of boats.

 

Notice:

Do not use any priming paint.


Very good covering

High gloss

The most popular colour pure white RAL 9016

Short drying time: 5-8 min

Touch dry: 20-25 min; Hardened: 18-24 h

Efficiency 1,5-2 m² depending on type of surface by one application

High resistance to abrasion and water influence

For indoor and outdoor use

Capacity 400 ml


Usage:

Before applying read carefully instructions on the container and use according to the manufacturer’s recommendations.


Recommended substrate conditions:

Don’t use any priming paint.

Preparing the substrate is very important action influencing the quality and life of varnish coating. Fundamental principle, which relate to all surfaces prepared to painting is to grind, degrease and dry out. After drying the primed surface should be grinded with fine-grained sandpaper (e.g. P600).

 

How to use:

Don’t use any priming paint previously. Do not cover already painted surface by any other paint. Apply product at temperature about 10-25°C (optimum temperature for good varnish drying). Drying time depends also on air humidity and product density. Painting should be made in well ventilated room. Prior to commencing painting, shake the container for about one minute, which will help mix the varnish by the ball found inside. Perform the test spray. Apply the varnish with few thin layers rather than one thick layer, from the distance of 25-30 centimeters. Following applying each layer, wait a few minutes. Following the completion, clean the nozzle. Put the container upside down, pressing the nozzle for the period of three seconds.

Write a review

Please login or register to review